Felt Feather Pillow

Designer: Patty Sloniger

Spread your decorating wings with a pillow embellished with appliqué and embroidered wool and felt feather motifs across the front.


Materials:

  • 114 yards of white fabric
  • 14 yard of tan fabric
  • Felt, felted wool, or wool:light aqua, green, gold, gray, dark green, rust, dark teal, cream
  • Embroidery floss: dark gray, cream, light gray
  • Sewing thread
  • 18″-square pillow insert
  • Feathers Pattern

 

FINISHED PILLOW: 18″ square

Yardages and cutting instructions are based on 42″ of usable fabric width. Measurements include  12” seam allowances. Sew with right sides together unless otherwise stated.


Cut the following pieces:

 

From white fabric, cut:

  • 1—17″ square (pillow front)
  • 2—13×19″ rectangles (back)

From tan fabric, cut:

  • 2—2×17″ border strips
  • 2—2×19″ border strips

From light aqua felt, felted wool, or wool, cut:

  • 1 of pattern A

From green felt, felted wool, or wool, cut:

  • 1 of pattern A

From gold felt, felted wool, or wool, cut:

  • 1 of pattern A
  • 1 of pattern C

From gray felt, felted wool, or wool, cut:

  • 3 of pattern B
  • 3 of pattern D
  • 3 of pattern F

From dark green felt, felted wool, or wool, cut:

  • 1 of pattern C

From rust felt, felted wool, or wool, cut: 

  • 1 of pattern C
  • 1 of pattern E

From dark teal felt, felted wool, or wool, cut:

  • 1 of pattern E

From cream felt, felted wool, or wool, cut:

  • 1 of pattern E

1. Referring to the Appliqué Placement Diagram, arrange the A–F shapes on the right side of the pillow front, spacing the shapes 38” from the edges. For the C-D feather in the top right, trim the C shape parallel to the top edge of the pillow front. For the E-F feather on the bottom left, trim the F shape parallel to the bottom edge of the pillow front. When satisfied with the arrangement, pin the shapes to the pillow front.

2. With the pieces pinned in place, cut random notches in the edges of each A and B shape to resemble feather edges.

3. Use three strands of embroidery floss for all stitching. Using dark gray embroidery floss, stitch a line of short running stitches along the inside edge of each A and B shape (Embroidery Diagram). Using cream embroidery floss, backstitch striping details as desired on the gray B shapes. Using light gray embroidery floss, backstitch a 214” quill for each feather. Feathers that extend along the left-hand edge and the bottom of the pillow front do not have quills. The feather at the lower right corner of the pillow front has a short quill that extends into the seam allowance.

 

4. Referring to Pillow Front Assembly Diagram, sew a tan 2×17″ border strip to the top and bottom edges of the pillow front. Add a tan 2×19″ border strip to each side edge of the pillow front. Press all seams toward borders.

5. Turn under one long edge of each white 13×19″ rectangle 14“; press. Turn under same long edges 14” again and stitch in place to hem pillow back pieces.

 

6. Referring to Pillow Back Assembly Diagram, overlap hemmed edges of pillow back pieces by about 6″ to make a 19″ square. Edgestitch across overlaps to make pillow back.

7. Layer pillow top and back with right sides together. Stitch around all edges to make pillow cover. Turn to right side; press. Insert pillow form through opening in pillow back.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s