DIY Jewelry Dish

diy-dishDesigner: Sara Perez

Imprint a lace motif into oven-bake clay to make a dish for holding jewelry, coins, or other small items.


Materials:

  • Polymer modeling clay
  • Pasta Maker
  • Lace
  • Glass or ceramic bowl
  • Colored chalk

noodle-maker1. Insert a soft, flattened ball of polymer modeling clay and a piece of lace into a clay-dedicated pasta maker at the same time. Turn crank to feed lace and clay through the machine and to imprint lace into clay. Peel off lace. If desired, stamp or etch letters into clay.

ceramic-bowl2. Lay clay over small upturned glass or ceramic bowl, textured-side down. Smooth clay over bowl; trim edges. Following clay manufacturer’s instructions, place clay-covered bowl in oven for increments of five minutes; check periodically. Remove when clay is not wet to the touch or is easily imprinted; let cool slightly.

chalk3. Carefully pry clay off bowl. Note: If clay becomes too cool, it may stay affixed to bowl, so it is important to remove clay before it cools completely. Brush colored chalk onto desired areas of the dish.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s